You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
We are open: Mon-Fri: 8.30-17:00
  • Your shopping cart is empty!

FW-75 Fleet Wash TFR (Caustic) 20L


£42.99 Ex Tax: £35.83

HLS Fleet Wash is a high strength traffic film remover designed to quickly and efficiently clean large fleet vehicles. It's specially formulated blend of silicates, phosphates, chelating agents and surfactants produce a high performance traffic film remover which will remove a wide range of hard to remove soilings. HLS Fleet Wash has been designed to offer rapid removal of dirt and grime from large fleet vehicle surfaces such as curtainsides, chassis, wheels, cabs and other exterior surfaces. HLS Fleet Wash is designed for use with both hot or cold water pressure machines and is one of our strongest traffic film removers. HLS Fleet Wash is safe to use on all exterior vehicle surfaces but contact with alkali sensitive surfaces should be kept to a minimum as prolonged contact may taint aluminium or galvanised surfaces.  

We can also supply this product in 210L drums & 1000L IBCs. For more information please get in touch.

Features:
• 100:1 Mixing Ratio
• Caustic Formulation 
• Paintwork Safe  
• Suitable for Trucks, Wagons, Busses, Trailers, Vans and more.
• Deep Cleaning Action
• Fast Shipping
• Made in the UK
• 30 Day Money Back Guarantee
 
Frequently asked questions:

How can i apply it?
HLS Fleet Wash is suitable for use through brush washers, pressure washers and washing by hand using either hot or cold water.
 
Is it easy to mix?
HLS Fleet Wash mixes instantly, is 100% water soluble and can be diluted with up to 100 parts of water depending on degree of soiling.
 
Is it safe:
HLS Fleet Wash is non-acidic, non-flammable, non-volatile and is completely bio-degradable.
 
What will it remove?
HLS Fleet Wash goes to work immediately, removing traffic film, grease, oil, diesel smoke, soiling, bitumen and tar deposits.
 
Any special features?
HLS Fleet Wash contains a water softening additive to eliminate scale. It also contains a unique water displacer which, following the rinsing operation, starts to work de-watering the surface, leaving the vehicle with a bright, gloss-like, streak free finish.
 
Will I have to use elbow grease?
To remove traffic film from vehicles HLS Fleet Wash will not require agitation for regular cleaning and light soiling. For heavily ingrained soiling, some agitation may be required.

Where can I use it?
HLS Fleet Wash can be used extensively in the transport industry on cars, vans, fleet vehicles, tankers, tilt-sided vehicles and containers. Due to the unique water displacer, vehicles which are cleaned with HLS Fleet Wash will appear to have been treated with wax. N.B: When washing by hand, rinse off thoroughly with hose under pressure. 

How to use
Usage Instructions Can be applied by pump spray, pressure washer or by hand. Always wear gloves. For general use dilute 1 part TFR with 100 parts water and apply to surface. For heavy soiling dilute 1 part with 50 parts water. Apply to surface and leave to work for up to 5 minutes. Do not allow product to dry on surface. Always ensure surface has been thoroughly rinsed with clean water.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha